Wholesale OEM/ODM Factory Directly Supply 1.5V Alkaline AA Battery Lr6
“Quality to start with, Honesty as base, Sincere company and mutual profit” is our idea, as a way to build constantly and pursue the excellence for Wholesale OEM/ODM Factory Directly Supply 1.5V Alkaline AA Battery Lr6, Since the manufacturing unit founded, we have now committed into the progress of new goods. Along with the social and economic pace, we’ll continue to carry forward the spirit of “high excellent, efficiency, innovation, integrity”, and stay with the operating principle of “credit initially, customer 1st, good quality excellent”. We’ll produce a excellent foreseeable future in hair output with our companions.
“Quality to start with, Honesty as base, Sincere company and mutual profit” is our idea, as a way to build constantly and pursue the excellence for China Alkaline Batteries and AA Alkaline Battery price, Our advanced equipment, excellent quality management, research and development ability make our price down. The price we offering may not be the lowest, but we guarantee it is absolutely competitive! Welcome to contact us immediately for future business relationship and mutual success!
TECH SPECS
1.Scope
1.1Reference Standards
GB/T8897.1 (IEC60086-1,MOD)（Primary Battery Part 1:General）
GB/T8897.2 (IEC60086-2,MOD)（Primary Battery Part2:Size and Technical requirements）
GB8897.5 (IEC 60086-5,IDT)（Primary Battery Part5：Safety of batteries with aqueous electrolyte）
1.2Environmental Protection Standard
The battery meets the standard of EU battery directives 2006/66/EC.
2.Chemical system, Voltage and Designation
Chemical system：Zn-MnO2(KOH),without Hg & Cr
Nominal Voltage: 1.5V
Designation : IEC：LR6 ANSI: AA JIS:AM-3 Others:24A,E91
Operating Temp Range Spec of -20℃ to +60℃
3.Battery Size
Battery meets the picture standard
3.1 Inspection Tool
Using vernier calipers which precision is up 0.02mm. to avoid short-circuit, should paste on one insulation material on one end of the vernier calipers.
3.2 Acceptance Method
Using GB2828.1-2003 sampling program, special sampling S-3, acceptance quality limitation: AQL=1.0
Weight And Discharging Capacity
Battery weight about:22.0g
Discharging capacity:2200mAh(Loading43Ω，4h/day,20±2℃ RH60±15%,End-point Voltage0.9V)
5. Open circuit voltage, loading voltage and short-circuit current
| Project | Open circuit Voltage（V） | Loading Voltage（V） | Short-circuit Voltage（A） | Sampling Voltage |
| In 2 months New battery |
1.60 | 1.45 | 7.00 | GB2828.1-2003 One Sampling, special sampling S-4,AQL=1.0 |
| 12 months storage in room temperature | 1.56 | 1.40 | 6.00 | |
| Inspection Condition | Loading 3.9Ω, loading time 0.3s，temp:20±2℃ | |||
6. Discharging Ability
| Discharging Temp：20±2℃ | |||||
| Condition | GB/T8897.2-2008 Requirements |
Shortest Average Discharging Time | |||
| Load | Discharging Way | End-point Voltage | 2 months new battery | 12 months storage battery | |
| 43Ω | 4h/d | 0.9 V | 65h | 85h | 78h |
| 3.9Ω | 1h/d | 0.8 V | 4.5h | 6.5h | 6h |
| 24Ω | 15s/min,8h/d | 1.0 V | 31h | 40h | 36h |
| 3.9Ω | 24h/d | 0.9 V | / | 340min | 310min |
| 10Ω | 24h/d | 0.9 V | / | 17.5h | 16h |
Accordance of shortest discharging time
1. Testing 9 batteries of each discharging way;
2. The result of the average discharging time from each discharging standard shall be equal to or more than the average minimum time requirement; no more than one battery has a service output less than 80% of the specified requirement;
3. The result of the average discharging time from each discharging standard shall be equal to or more than the average minimum time requirement, if one battery has a service output less than 80% of the specified requirement then take another 9 pieces to test again. This lot of batteries are qualified if the result meets the NO.2 provision. If not qualified then will not test again.
7. Anti-leakage ability
| Project | Condition | Requirements | Qualified Standard |
| Over Discharging | Continuous discharging 48h in 20±2℃,humidity 60±15%,load 10Ω condition. | No leakage by visual inspection | N=9 Ac=0 Re=1 |
| High-temp storage | Storing in 60±2℃, relative humidity 90% condition for 20 days. | N=30 Ac=1 Re=2 |
8. Safety Requirements
| Project | Condition | Requirements | Qualified Standard |
| External Short-circuit | Using wire to connect positive and negative pole in 20±2℃ for 24h. | No Explosion | N=5 Ac=0 Re=1 |
| Improper Equipment | 4 batteries in series connection, one of them is in reverse connection. | Leakage happened on the reversed battery or the shell temp reduce to room temp | N=4×5 Ac=0 Re=1 |
Signs
The following signs are on the battery body:
1. Model: LR6/AA
2. Manufacturer and brand: Sunmol ®
3. Battery Poles: “+”and“-”
4. Expiry date or manufacturing date
5. Warnings.
Cautions For Using
1. This battery can’t be charged, leakage and explosion may happen when charging.
2. Make sure the battery is in correct position as + and -.
3. Short-circuit, heating, disposing of into fire or disassembling of battery is prohibited.
4. Battery can not be forced discharged, which leads to excess gassing and may result in bulging, leakage and de-crimping of cap.
5. New batteries and used ones can not be used at the same time. It is recommended to use the same brand when replacing batteries.
6. The battery should be taken out from the device which will not be used for a long time.
7. Exhausted battery should be taken out from the device.
8. Welding batteries are prohibited or it will cause damage.
9. The batteries should be kept from children, if swallowed, contact a doctor immediately.
11. Normal Package
Each 2,3 or 4 batteries in a shrink package,60 pieces in one inner box,12 boxes in one carton.
12. Storage and Expiry
1. Batteries should be put in cool, dry and with air-flowing places
2. The batteries should not be exposed in sunshine or in raining places.
3. Do not mix the batteries which without labels
4. Storing in 20℃±2℃, 60%±15%RH condition. The storage time is 3 years.
13. Nominal discharging curve
Discharging condition: 20℃±2℃，RH60±15%
“Quality to start with, Honesty as base, Sincere company and mutual profit” is our idea, as a way to build constantly and pursue the excellence for Wholesale OEM/ODM Factory Directly Supply 1.5V Alkaline AA Battery Lr6, Since the manufacturing unit founded, we have now committed into the progress of new goods. Along with the social and economic pace, we’ll continue to carry forward the spirit of “high excellent, efficiency, innovation, integrity”, and stay with the operating principle of “credit initially, customer 1st, good quality excellent”. We’ll produce a excellent foreseeable future in hair output with our companions.
Wholesale OEM/ODM China Alkaline Batteries and AA Alkaline Battery price, Our advanced equipment, excellent quality management, research and development ability make our price down. The price we offering may not be the lowest, but we guarantee it is absolutely competitive! Welcome to contact us immediately for future business relationship and mutual success!
