about-us1 (1)

Products

Supply ODM China No. 7 Alkaline Lr03 AAA Dry Battery with CE Certificate

Short Description:

The Alkaline AAA battery (or LR03 battery) is a standard size of dry cell battery. One or more AAA batteries are commonly used in low-drain portable electronic devices. An alkaline battery in this size is designated by IEC as LR03, by ANSI C18.1 as 24, by old JIS standard as AM-4, and by other manufacturer and national standard designations that vary depending on the cell chemistry. The size was first introduced by The American Ever Ready Company in 1911.


Product Detail

Product Tags

We know that we only thrive if we could guarantee our combined price tag competiveness and quality advantageous at the same time for Supply ODM China No. 7 Alkaline Lr03 AAA Dry Battery with CE Certificate, We maintain timely delivery schedules, innovative designs, top quality and transparency for our buyers. Our moto should be to supply quality goods inside of stipulated time.
We know that we only thrive if we could guarantee our combined price tag competiveness and quality advantageous at the same time for China AAA Battery and Lr03 Alkaline Battery price, On today, we’ve got customers from all over the world, including USA, Russia, Spain, Italy, Singapore, Malaysia, Thailand, Poland, Iran and Iraq. The mission of our company is to supply the highest quality merchandise with best price. We have been looking forward to doing business with you.

Introduction

1.5V Alkaline AAA AM4 Battery (2)
1.5V Alkaline AAA AM4 Battery (4)

Scope

This specification provides the technical requirements of alkaline manganese dioxide battery(LR03).The requirements and size should satisfy or above GB/T8897.1 and GB /T8897.2 if there is no any other detail requirements.

1.1Reference Standards

GB/T8897.1 (IEC60086-1, MOD)(Primary Battery Part 1: General)

GB/T8897.2 (IEC60086-2, MOD)(Primary Battery Part2: Size and Technical requirements)

GB8897.5 (IEC 60086-5, MOD)(Primary Battery Part5: Safety of batteries with aqueous electrolyte)

1.2Environmental Protection Standard

The battery meets the standard of EU battery directives 2006/66/EC.

Chemical system, Voltage and Designation

Chemical system: Zn-MnO2(KOH), without Hg & Cr

Nominal Voltage: 1.5V

Designation: IEC: LR03     ANSI: AAA     JIS: AM-4     Others: 4003,E92

Operating Temp Range Spec of -20℃ to +60℃

Battery Size

Battery meets the picture standard

3.1 Inspection Tool

Using vernier calipers which precision is up 0.02mm. to avoid short-circuit, should paste on one insulation material on one end of the vernier calipers.

3.2 Acceptance Method

Using GB2828.1-2003 sampling program, special sampling S-3, acceptance quality limitation: AQL=1.0

1.5V Alkaline AAA AM4 Battery

Product Features

Weight and discharging capacity

Battery weight about: 10.5g

Discharging capacity: 1000mAh(Loading75Ω, 4h/day, 20±2℃ RH60±15%, End-point Voltage0.9V)

Open circuit voltage, loading voltage and short-circuit current

Project

Open circuit Voltage(V)

Loading Voltage(V)

Short-circuit Voltage(A)

Sampling Voltage

In 2 months

New battery

1.59

1.40

5.00

GB2828.1-2003 One Sampling, special sampling S-4,AQL=1.0

12 months storage in room temperature

1.56

1.35

4.00

Inspection Condition

Loading 3.9Ω, loading time 0.3s,temp:20±2℃

Technical Requirements

Discharging Ability

Discharging Temp:20±2℃

Condition

GB/T8897.2

Requirements

Shortest Average Discharging Time

Load

Discharging Way

End-point Voltage

 

2 months new battery

12 months storage battery

10Ω

1h/d

0.9 V

6h

7.5h

6.8h

75Ω

4h/d

0.9 V

50h

60h

55h

5.1Ω

4min/h,8h/d

0.9 V

145min

160min

145min

24Ω

15s/min,8h/d

1.0 V

14.5h

18h

16h

20Ω

24h/d

0.9 V

/

15h

13.5h

3.9Ω

24h/d

0.9 V

/

135min

110min

Accordance of shortest discharging time

1. Testing 9 batteries of each discharging way

2. The result of the average discharging time from each discharging standard shall be equal to or more than the average minimum time requirement; no more than one battery has a service output less than 80% of the specified requirement

3. The result of the average discharging time from each discharging standard shall be equal to or more than the average minimum time requirement, if one battery has a service output less than 80% of the specified requirement then take another 9 pieces to test again. This lot of batteries are qualified if the result meets the NO.2 provision. If not qualified then will not test again.

Packaging and Marking

Anti-leakage ability

Project

Condition

Requirements

Qualified

Standard

Over Discharging

Continuous discharging 48h in 20±2℃, huminity60±15%, load 10Ω condition.

No leakage by visual inspection

N=9

Ac=0

Re=1

High-temp storage

Storing in 60±2℃, relative humidity 90% condition for 20 days.

 

N=30

Ac=1

Re=2

Safety Requirements

Project

Condition

Requirements

Qualified Standard

External Short-circuit

Using wire to connect positive and negative pole in 20±2℃ for 24h.

No Explosion

N=5

Ac=0

Re=1

Improper Equipment

4 batteries in series connection, one of them is in reverse connection.

Leakage happened on the reversed battery or the shell temp reduce to room temp

N=4×5

Ac=0

Re=1

Cautions

Signs

The following signs are on the battery body

1. Model: LR03/AAA

2. Manufacturer and brand: Sunmol ®

3. Battery Poles:”+”and”-”

4. Expiry date or manufacturing date

5. Warnings.

Cautions for using

1. This battery can’t be charged, leakage and explosion may happen when charging.

2. Make sure the battery is in correct position as + and -.

3. Short-circuit, heating, disposing of into fire or disassembling of battery is prohibited.

4. Battery can not be forced discharged, which leads to excess gassing and may result in bulging, leakage and de-crimping of cap.

5. New batteries and used ones can not be used at the same time. It is recommended to use the same brand when replacing batteries.

6. The battery should be taken out from the device which will not be used for a long time.

7. Exhausted battery should be taken out from the device.

8. Welding batteries are prohibited or it will cause damage.

9. The batteries should be kept from children, if swallowed, contact a doctor immediately.

Reference Standards

Normal Package

Each 2, 3 or 4 batteries in a shrink package, 60 pieces in one inner box, 12 boxes in one carton.

Storage and Expiry 

1. Batteries should be put in cool, dry and with air-flowing places

2. The batteries should not be exposed in sunshine or in raining places.

3. Do not mix the batteries which without labels

4. Storing in 20℃±2℃, 60%±15%RH condition. The storage time is 3 years.

Discharge curve

Nominal discharging curve

Discharging condition: 20℃±2℃, RH60±15%

With the progress of product technology, technical parameters, the specification will be updated too, please contact Anyida for latest specification.

FAQ

Q1. Could you do customer brand? 

A:Of course ,we could provide professional OEM service.

 

Q2. What is your terms of packing?

A: Generally, we pack our batteries in carton .If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

 

Q3. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance, OR LC at sight , DP

 

 

Q4. What is your terms of delivery?

A: EXW, FOB, CIF,CNF

Q5. How about your battery delivery time?

A: Within 35 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

 

Q6. What is your mini rechargeable battery sample policy?

A: We can supply the free mini rechargeable battery sample battery, but the customers have to pay the courier cost.

 

Q7: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

 

Q8.Is this product safe?

 

A: Anti short circuit & Anti scald, Anti explosion,Environmental friendly.

 

Q9.What’s the MOQ?

 

A:Small quantity is OK for trial order or samples if we have stock,customize brand or customize request please contact us.

 

Q10:what is advantage of being our sunmol sole agents ?

 

A:We are not only offer the disocudn prices and reliable quality product but also we can offer free a set of gift for you to promoted our brand . once your reache our goals and we can refund comission or send free goods to support your selling.

 

 

We know that we only thrive if we could guarantee our combined price tag competiveness and quality advantageous at the same time for Supply ODM China No. 7 Alkaline Lr03 AAA Dry Battery with CE Certificate, We maintain timely delivery schedules, innovative designs, top quality and transparency for our buyers. Our moto should be to supply quality goods inside of stipulated time.
Supply ODM China AA Battery and Lr20 Alkaline Battery price, On today, we’ve got customers from all over the world, including USA, Russia, Spain, Italy, Singapore, Malaysia, Thailand, Poland, Iran and Iraq. The mission of our company is to supply the highest quality merchandise with best price. We have been looking forward to doing business with you.


  • Previous:
  • Next:

  • Write your message here and send it to us