Reasonable price Manganese Alkaline Battery - DG Sunmo 1.5V LR14 AM2 Alkaline C Battery – Sunmol

Introduction

Scope

This specification provides the technical requirements of alkaline manganese dioxide battery (LR14). The requirements and size should satisfy or above GB/T8897.1 and GB /T8897.2 if there is no any other detail requirements.

1.1Reference Standards

GB/T8897.1 (IEC60086-1, MOD)（Primary Battery Part 1: General）

GB/T8897.2 (IEC60086-2, MOD)（Primary Battery Part2: Size and Technical requirements）

GB8897.5 (IEC 60086-5, MOD)（Primary Battery Part5: Safety of batteries with aqueous electrolyte）

1.2Environmental Protection Standard

The battery meets the standard of EU battery directives 2006/66/EC.

Chemical system, Voltage and Designation

Chemical system: Zn-MnO2(KOH), without Hg &Cr

Nominal Voltage: 1.5V

Designation: IEC: LR14     ANSI: C     JIS: AM-2     Others: E93

Battery Size

Battery meets the picture standard

3.1 Inspection Tool

Using vernier calipers which precision is up 0.02mm. to avoid short-circuit, should paste on one insulation material on one end of the vernier calipers.

3.2 Acceptance Method

Using GB2828.1-2003 sampling program, special sampling S-3,acceptance quality limitation: AQL=1.0

Product Features

Weight and discharging capacity

Battery weight about: 65g

Discharging capacity: 5000mAh(Loading3.9Ω, 24h/day, 20±2℃ RH60±15%, End-point Voltage0.9V)

Open circuit voltage, loading voltage and short-circuit current

Technical Requirements

Discharging Ability

Accordance of shortest discharging time

1. Testing 9 batteries of each discharging way

2. The result of the average discharging time from each discharging standard shall be equal to or more than the average minimum time requirement; no more than one battery has a service output less than 80% of the specified requirement

3. The result of the average discharging time from each discharging standard shall be equal to or more than the average minimum time requirement, if one battery has a service output less than 80% of the specified requirement then take another 9 pieces to test again. This lot of batteries are qualified if the result meets the NO.2 provision. If not qualified then will not test again.

Packaging and Marking

Anti-leakage ability

Safety Requirements

Cautions

Signs

The following signs are on the battery body：

1. Model: LR14/C

2. Manufacturer and brand: Sunmol ®

3. Battery Poles: “+”and”-”

4. Expiry date or manufacturing date

5. Warnings.

Cautions for using

1. This battery can’t be charged, leakage and explosion may happen when charging.

2. Make sure the battery is in correct position as + and -.

3. Short-circuit, heating, disposing of into fire or disassembling of battery is prohibited.

4. Battery can not be forced discharged, which leads to excess gassing and may result in bulging, leakage and de-crimping of cap.

5. New batteries and used ones can not be used at the same time. It is recommended to use the same brand when replacing batteries.

6. The battery should be taken out from the device which will not be used for a long time.

7. Exhausted battery should be taken out from the device.

8. Welding batteries are prohibited or it will cause damage.

9. The batteries should be kept from children, if swallowed, contact a doctor immediately.

Reference Standards

Normal Package

Each 12 pieces in one inner box, 20 boxes in one carton.

Storage and Expiry 

1. Batteries should be put in cool, dry and with air-flowing places

2. The batteries should not be exposed in sunshine or in raining places.

3. Do not mix the batteries which without labels

4. Storing in 20℃±2℃, 60±15%RH condition. The storage time is 3 years.

Discharge curve

Nominal discharging curve

Discharging condition: 20℃±2℃，RH60±15%

The company’s advanced production equipment, sophisticated testing equipment, and standardized management provide a reliable guarantee for the stability and improvement of product quality.

A large amount of capital has been invested in new product development and technological innovation, and a large number of high-tech talents have been introduced. At present, we are exported more than 5,000 millions batteries annually.  

Advantages

1. 1.A complete range of alkaline battery /zinc carbon battery/ ni-mh rechargeable battery and button cell battery , one stop for customization
2. 2.Customized all kinds of card pack,Factory price and excellent communication skills
3. 3.Responsible after-sales policy
4. 4.Free sample and free design 

Company History

1. Dongguan Sunmol Battery Co., Ltd.

   Was established in December 1997, with 25 years of development experience, Sunmol battery is proud to be a factory of alkaline battery, zinc carbon battery,AG alkaline button battery and a series of CR lithium button battery. The products are widely used in remote controls, cameras, electronic dictionaries, calculators, watches, electronic toys and other electronic appliances.All of our equipment are from the Germany and Japan, we learned the advanced technology from them in the meantime. With the good homemade packaging & printing producing lines and the newly tester, accompany our skillful people and hard-working staff.