about-us1 (1)

Products

ODM Supplier China Stable Power Rate Assured Cpin Cell 1.5V AG0 AG1 AG2 AG3 AG4 AG5 AG6 AG7 AG8 AG9 AG10 AG11 AG12 AG13 0%Hg Alkaline Button Cell Battery for Clock

Short Description:

This standard describes the external dimensions, characteristics, technical requirements and precautions of alkaline zinc-manganese button AG13 batteries. This standard applies to the alkaline zinc-manganese button AG13 battery produced by Dongguan Sunmol Battery Co.,Ltd


  • :
  • Product Detail

    Product Tags

    We depend on sturdy technical force and continually create sophisticated technologies to satisfy the demand of ODM Supplier China Stable Power Rate Assured Cpin Cell 1.5V AG0 AG1 AG2 AG3 AG4 AG5 AG6 AG7 AG8 AG9 AG10 AG11 AG12 AG13 0%Hg Alkaline Button Cell Battery for Clock, We hope to establish additional organization interactions with prospects all over the entire world.
    We depend on sturdy technical force and continually create sophisticated technologies to satisfy the demand of China AG2 Battery and 1.5V Alkaline Coin Cell price, Our company regards “reasonable prices, high quality,efficient production time and good after-sales service” as our tenet. We hope to cooperate with more customers for mutual development and benefits in future. Welcome to contact us.

    Introduction

    18173858

    Scope of application

    This standard describes the external dimensions, characteristics, technical requirements and precautions of alkaline zinc-manganese button AG13 batteries. This standard applies to the alkaline zinc-manganese button AG13 battery produced by Dongguan Sunmol Battery Co., Ltd.

    Definition

    2.1 Nominal capacity.

    It  re f e r s  to  the  discharge capacity when discharging continuously with 1KΩ at 20±2℃ to the termination voltage of 0.9V.

    Product Model and Size

    3.1 Product Model

    AG13 alkaline zinc-manganese coin cell

    3.2 Product Size

    XPOZN91ADXNP

    Product Features

    Projects Characteristics
    Nominal capacity 140mAh
    Nominal voltage 1.5V
    Discharge termination voltage 0.9V
    Humidity range 60±15%RH (non-condensing)
    Product Size Maximum height:5.4mm Maximum diameter:Φ11.6mm
    Average weight 1.98g

    Technical Requirements

    Test Environment

    Unless otherwise stated, all tests were performed at a temperature of 20±2°C and a relative humidity of 60±15%.

    Serial number

    Projects

    Test conditions

    Judgment criteria

    5.2.1

    Storage Performance

    Sampling plan: MIL-STD-105E, general levelⅡ, single sampling method, AQL=0.4

    Note: Load voltage test method: 6.8KΩ/0.3 seconds, initial system

    The test must be carried out within 30 days after delivery

    No-load voltage (V)

    Load voltage(V)

    Initially made: 1.55 / 1.50

    5.2.2

    Discharge performance

    Discharge load: 22kΩ; discharge time: 24 hours/day continuous discharge; termination voltage: 1.2V

    Note: Prefabricated cells must be tested within 30 days of delivery

    Initially made ≥ 600 hours

    Storage at room temperature for 12 months ≥ 540 hours

    Discharge load: 1kΩ; discharge time: 24 hours/day continuous discharge; termination voltage: 0.9V

    Note: Prefabricated cells must be tested within 30 days of delivery

    Initially made ≥ 100 hours

    Storage at room temperature for 12 months ≥ 90 hours

    5.2.3

    Short circuit performance

    Short circuit 24 hours at 20±2℃

    No explosion N=5, Ac=0, Re=1.

    And 5.2.3 Acceptance criteria.

    1. Nine cells were discharged for each discharge condition.

    2. The average discharge time is equal to or greater than the specified value of the minimum average discharge time, and no battery discharge time is less than 80% of the specified value, the battery discharge time is considered to meet the requirements.

    3. If the above results do not pass, you can repeat the test again.

    Shelf life

    1 year storage at room temperature and suitable environment, after 1 year storage, the battery can retain 90% capacity

    Packaging and Marking

    Packaging and marking can be done according to customer requirements. In the absence of special requirements, the following are generally marked on the battery.

    Logo Design

    1. Battery model: AG13

    2. Battery type: Manufacturer’s name “Sunmol” & “DG Sunmo”

    3. The polarity mark “BUTTON CELL +” is marked on the positive terminal of the battery

    Packaging pictures

    W21

    Cautions

    1. It is prohibited to charge the battery, which may lead to battery leakage, heat, or even explosion and fire.

    2. When installing the battery, please install the battery in the correct direction to avoid damaging the battery by over-discharging or back-charging, which may even cause battery leakage, heat, rupture and fire.

    3. It is forbidden to short-circuit, heat, put the battery into fire, or attempt to disassemble it.

    4. It is forbidden to over-discharge the battery, which may lead to battery leakage or danger.

    5. It is forbidden to use the new battery and the used battery at the same time.

    6. Please remove the depleted battery from the appliance to avoid over-discharging the battery and causing it to leak.

    7. It is forbidden to weld the battery to avoid damaging the insulation ring and the protection device.

    8. Please do not place the battery in the hands of infants and children to avoid accidentally swallowed, in case of swallowing, please seek medical attention immediately.

    9. It is forbidden to take the battery apart, destroy the battery casing and modify the battery to avoid a short circuit, which will eventually lead to battery leakage, or even rupture and fire.

    If the product leaks and electrolyte gets into your eyes, do not rub, flush your eyes with water, and if necessary, go to a hospital immediately for treatment, otherwise your eyes will be injured.

    If the product emits odor, heat, discoloration, deformation or any abnormalities occur during use or storage, immediately remove the product from the unit and discontinue use.

    Reference Standards

    GB/T 8897.1-2008 Primary Battery Part 1: General Provisions

    GB/T 8897.2-2008 Primary battery Part 2: External dimensions and electrical performance requirements

    GB/T 8897.3-2006 Primary battery Part 3: Watch battery

    GB/T 8897.5-2006 Primary Battery Part 5: Safety requirements for electrolyte batteries in aqueous solution

    Discharge curve


    We depend on sturdy technical force and continually create sophisticated technologies to satisfy the demand of ODM Supplier China Stable Power Rate Assured Cpin Cell 1.5V AG0 AG1 AG2 AG3 AG4 AG5 AG6 AG7 AG8 AG9 AG10 AG11 AG12 AG13 0%Hg Alkaline Button Cell Battery for Clock, We hope to establish additional organization interactions with prospects all over the entire world.
    ODM Supplier China AG2 Battery and 1.5V Alkaline Coin Cell price, Our company regards “reasonable prices, high quality,efficient production time and good after-sales service” as our tenet. We hope to cooperate with more customers for mutual development and benefits in future. Welcome to contact us.


  • Previous:
  • Next:

  • Write your message here and send it to us