about-us1 (1)

Products

  • Ni-MH FR6 FR03 AA AAA rechargeable battery

    Ni-MH FR6 FR03 AA AAA rechargeable battery

    Low self discharge and environmentally friendly
    Ready to use for any chargers
    Great performance even in -20℃ to 50℃
    Recycle+ batteries with 1000 cycle and great savings

  • DG Sunmo 1.5V LR6 AM3 Alkaline AA Battery

    DG Sunmo 1.5V LR6 AM3 Alkaline AA Battery

    This specification provides the technical requirements of alkaline manganese dioxide battery(LR6).The requirements and size should satisfy or above GB/T8897.1 and GB /T8897.2 if there is not any other detail requirements.
  • DG Sunmo 1.5V LR14 AM2 Alkaline C  Battery

    DG Sunmo 1.5V LR14 AM2 Alkaline C Battery

    Alkaline C battery nominal voltage is 1.5V. DG Sunmo Alkaline C batteries discharge time is 1100 minutes (-0.9V). Like the D battery, the C battery size has been standardized since the 1920s.

    The C battery is called “14″ in current ANSI standards of battery nomenclature, and Alkaline C battery in IEC standards is designated “LR14″.

  • DG Sunmo 1.5V LR03 AM4 Alkaline AAA Battery

    DG Sunmo 1.5V LR03 AM4 Alkaline AAA Battery

    The Alkaline AAA battery (or LR03 battery) is a standard size of dry cell battery. One or more AAA batteries are commonly used in low-drain portable electronic devices. An alkaline battery in this size is designated by IEC as LR03, by ANSI C18.1 as 24, by old JIS standard as AM-4, and by other manufacturer and national standard designations that vary depending on the cell chemistry. The size was first introduced by The American Ever Ready Company in 1911.

  • DG Sunmo 1.5V LR20 AM1 Alkaline D Battery

    DG Sunmo 1.5V LR20 AM1 Alkaline D Battery

    ALKALINE D battery (D cell or IEC LR20) is a standardized size of a dry cell. A D cell is cylindrical with an electrical contact at each end; the positive end has a nub or bump. D cells are typically used in high current drain applications, such as in large flashlights, radio receivers, and transmitters, and other devices that require an extended running time.

  • DG Sunmo High quality 6LR61 9V Alkaline Battery

    DG Sunmo High quality 6LR61 9V Alkaline Battery

    The 9-volt battery, is a common battery voltage. Batteries of various sizes and capacities are manufactured; a very common size is known as PP3, introduced for early transistor radios. The PP3 has a rectangular prism shape with rounded edges and a polarized snap connector at the top. This type is commonly used for many applications including household uses such as smoke and gas detectors, clocks, and toys.

  • 1.5V R03 UM4 Heavy Duty AAA Battery

    1.5V R03 UM4 Heavy Duty AAA Battery

    AAA batteries are most often used in small electronic devices, such as TV remote controls, MP3 players and digital cameras. Devices that require the same voltage, but have a higher current draw, are often designed to use larger batteries such as the AA battery type. AA batteries have about three times the capacity of AAA batteries. With the increasing efficiency and miniaturization of modern electronics, many devices that previously were designed for AA batteries (remote controls, cordless computer mice and keyboards, etc.)

  • 1.5V R14 UM2 Heavy Duty C Battery

    1.5V R14 UM2 Heavy Duty C Battery

    A C battery measures 50 mm (1.97 in) length and 26.2 mm (1.03 in) diameter.The C battery (C size battery or R14 battery) is a standard size of dry cell battery typically used in medium-drain applications such as toys, flashlights, and musical instruments.Like the D battery, the C battery size has been standardized since the 1920s.

  • 1.5V R20 UM1 Heavy Duty D Battery

    1.5V R20 UM1 Heavy Duty D Battery

    The U.S. military designation for this battery has been BA-30 since sometime before World War II. A D battery (D cell or IEC A D battery (D cell or R20) is a standardized size of a dry cell A D battery (D cell or R20) is a standardized size of a. A D cell (D cell or R20) is a standardized size of a. A D cell is cylindrical with an electrical contact at each end; the positive end has a nub or bump. cells are typically used in high current drain applications, such as in large flashlights, radio receivers, and transmitters,  and other devices that require an extended running time.

  • Super heavy duty 6f22 PP3 zinc carbon 9v battery

    Super heavy duty 6f22 PP3 zinc carbon 9v battery

    The nine-volt PP3-size battery is commonly available in primary zinc-carbon Designations for this format include NEDA 1604 and IEC 6F22 (for zinc-carbon) or MN1604 6LR61 (for alkaline). The size, regardless of chemistry, is commonly designated PP3—a designation originally reserved solely for carbon-zinc, or in some countries, E or E-block.[3] A range of PP batteries was produced in the past, with voltages of 4.5, 6, and 9 volts and different capacities; the larger 9-volt PP6, PP7, and PP9 are still available. A few other 9-volt battery sizes are available: A10 and A29.

  • 3V Lithium CR2032 CR2025 CR2016 Button Cell Battery

    3V Lithium CR2032 CR2025 CR2016 Button Cell Battery

    Scope This specification is applicable to Coin Type Lithium-Manganese Dioxide Battery CR2032 Battery Type CR2032 Nominal Voltage 3.0V Nominal Capacity 210mAh (discharged continuously at 20±2℃ under15kÙ load to 2.0V end-voltage) Outer Dimensions outer dimensions shall be as shown in Fig1. Weight 3.0grams (approx) Terminals positive can(noted“+”) negative cap Operating Temperature Range -20℃ ~ 60℃ Electrochemistry System Anode Manganese Dioxide ...
  • 1.5V AG13 AG10 AG series Alkaline Button Cell Battery

    1.5V AG13 AG10 AG series Alkaline Button Cell Battery

    This standard describes the external dimensions, characteristics, technical requirements and precautions of alkaline zinc-manganese button AG13 batteries. This standard applies to the alkaline zinc-manganese button AG13 battery produced by Dongguan Sunmol Battery Co.,Ltd

12 Next > >> Page 1 / 2